FIRE SWITCH 108 Altronix Power Supply

The Altronix FireSwitch108 is a cost effective managed NAC Power Extender. It interfaces with 12 or 24VDC Fire Alarm Control Panels (FACP) to provide Notification Appliance Circuit expansion support, for additional horns/strobes to allow ADA compliancy. It also provides auxiliary power to support system accessories. It delivers electronically regulated and filtered 24VDC power to Class B or Class ANAC loop circuits. Additionally, a separate 1A. auxiliary output for 4-wire smoke detectors is available. Alarm current can be divided between the eight outputs for powering NAC devices. Outputs are rated at 2.5A. max., and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output). In non-alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a loop trouble, the FACP will be notified via the steered input (input 1 or input 2). In addition, there are common trouble output terminals [NC, C, NO] which are used to indicate general loop/system trouble. Two (2) FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the eight outputs. It provides a programmable LCD display interface, plus an ethernet port interface for remote programmability and monitoring.

FLORIDA: 0
ILLINOIS: 0
MANUFACTURER: Altronix
MASSACHUSETTS: 0
NEVADA: 0
OUTPUT VOLTS: 24VDC
PURPOSE: General
SERIES: Altronix Power Supplies
TYPE: Hardwired