Barzel Lock Stocks The 7160 In All Opions. Description: 7160 Electric Strikes with 4-7/8” faceplates are designed for mortise or cylindrical type locksets with up to 3/4” latchbolt projection without deadbolt. For use in aluminum jambs.
Function: Remote electrical control of any door equipped with a mortise or cylindrical type lockset with up to 3/4” latchbolt projection without deadbolt. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into aluminum jamb (or opposing door) sections as shallow as 1-7/8”. Fits existing prep for discontinued Adams Rite 7560, 7860 Electric Strikes.
313-Dark Bronze Anodized Aluminum
628-Clear Aluminum Anodized
Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.
Case: Approximately 1” x 3-3/8” x 1-7/8” deep.
Strike Lip: Basic 7160 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.
Strike Opening: 3/4” x 1-7/16” x 5/8” deep. Bolt retainer jaw is stainless steel. Strike location must be centered on latchbolt.
Faceplate: Measures 1-1/4 x 4-7/8” Faceplate is flat, with radiused corners. Available in a wide range of architectural finishes.
Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.