Sargent 11U94-2 Double Lever Pull Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11U94-2 Double Lever Pull Lever-

 • For 161 and ANSI A115.2 prepared doors

• Lever and rose both sides joined by aligning tube and latchbolt tube

• Dummy latch plate

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)

Sargent 11U94 Double Lever Pull Dummy Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11U94 Double Lever Pull Dummy Lever-

• For wood or custom hollow metal doors

• Lever and rose both sides joined by one through-bolt and four surface applied screws each side (hidden)

• Requires special door preparation 

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)

Sargent 11U93 Single Lever Pull Dummy Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11U93 Single Lever Pull Dummy Lever-

• For wood or custom hollow metal doors

• Lever and rose attached by through-bolt and four surface applied screws (hidden)

• Requires 5/16" (8mm) diameter hole

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)

Sargent 11U65 Privacy/Bathroom Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can.

Sargent 11U65 Privacy/Bathroom Lever-

• Latchbolt by either lever unless outside lever is

• Requires special door preparation – see template locked by push button in inside lever

• Turning inside lever or closing door releases button

• Emergency button in outside lever unlocks, with use of a blade screw driver in outside lever and releases inside button

• Emergency key supplied only when ordered separately (14-0057)

• ANSI F76

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)
Sargent T-Zone 11U15 Passage Lever Lock

Sargent 11U15 Passage Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can.

Sargent 11U15 Passage Lever-

• Latchbolt by either lever

• ANSI F75

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)

Sargent 11G68 Hospital Privacy Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can.

Sargent 11G68 Hospital Privacy Lever-

• Latch by either lever unless outside lever is locked by push button in inside lever

• Turning inside lever or closing door releases button

• Rotating thumbturn in outside lever unlocks the outside lever and releases the inside button

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)
Sargent T-Zone 11G54 Corridor Lever Lock

Sargent 11G54 Corridor Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11G54 Corridor Lever-

• Deadlocking latch

• Latchbolt by either lever unless outside lever is locked by push button inside or key outside

• Rotating inside lever releases button

• Push button will not depress unless door is in closed position

• Key outside locks or unlocks outside lever and releases inside button

• ANSI F90

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)

Sargent 11G50 Hotel, Dormitory or Apartment Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11G50 Hotel, Dormitory or Apartment Lever-

• Deadlocking latch

• Latchbolt by key outside and lever inside

• Outside lever always rigid

• Depressing push button when door is closed shuts out all keys except emergency key and projects visual occupancy indicator in cylinder face

• Push button will not depress unless door is closed in position

• Push button released by turning inside lever automatically reactivating all keys and retracting visual occupancy indicator

• Lock out key fixes push button in locked position, shutting out all keys except emergency

• Lock out key provided only when ordered separately (14-0299)

• ANSI F93

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)
Sargent T-Zone 11G44 Service Station Lever Lock

Sargent 11G44 Service Station Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11G44 Service Station Lever-

• Deadlocking latch

• Latchbolt by either lever unless outside lever is locked by push button of inside lever

• Key retracts latchbolt when outside lever is locked

• Push button will not depress unless door is in closed position

• Push button released by turning inside lever or by key in outside lever unless push button is fixed in locked position by turning coin slot in inside lever

• ANSI F92

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)

Sargent 11G38 Classroom Security Intruder Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11G38 Classroom Security Intruder Lever-

• Deadlocking latch

• Latchbolt by either lever unless outside lever is locked by key

• Key in either lever locks or unlocks outside lever

• When inside key locks the outside lever only the inside key can unlock the outside lever. The outside key only retracts the latchbolt until outside lever is unlocked by inside key

• Inside lever always operable

• Locking direction indicated on inside rose standard with this function.

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)
Sargent T-Zone 11G37 Classroom Lever Lock

Sargent 11G37 Classroom Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11G37 Classroom Lever-

• Deadlocking latch

• Latchbolt by either lever unless outside lever is locked by key

• Key in outside lever locks or unlocks outside lever

• Inside lever always operative

• ANSI F84

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)
Sargent T-Zone 11G30 Communicating Lever Lock

Sargent 11G30 Communicating Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11G30 Communicating Lever-

• Deadlocking latch

• Latchbolt by either lever

• Key in either lever locks or unlocks its own lever only

• ANSI F80

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)
Sargent T-Zone 11G24 Entrance or Office Lever Lock

Sargent 11G24 Entrance or Office Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11G24 Entrance or Office Lever-

• Deadlocking latch

• Latchbolt by either lever unless outside lever is locked by push button in inside lever

• Push button released by key or turning inside lever

• Closing door does not unlock outside lever or release button

• ANSI F82

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)

Sargent 11G17 Utility, Asylum or Institutional Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11G17 Utility, Asylum or Institutional  Lever-

• Deadlocking latch

• Both levers rigid at all times

• Latchbolt by key either side

• ANSI F87

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)

Sargent 11G16 Classroom, Security, Apartment, Exit, Privacy Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11G16 Classroom, Security, Apartment, Exit, Privacy Lever-

• Deadlocking latch

• Latchbolt by either lever unless outside lever is locked by key in inside lever

• Key in outside lever only retracts latchbolt when outside lever is locked

• ANSI F88

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)

Sargent 11G13-3 Exit or Communicating Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can.

Sargent 11G13-3 Exit or Communicating Lever-

• Deadlocking latch

• Blank rose outside

• Latchbolt by lever inside

• Minimum clearance of 1-1/4" (32mm) required between doors

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)
Sargent T-Zone 11G13 Exit Lever Lock

Sargent 11G13 Exit Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can.

Sargent 11G13 Exit Lever-

• Deadlocking latch

• Latchbolt by inside lever

• Outside lever rigid at all times

• ANSI F89

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)
Sargent T-Zone 11G05 Entrance or Office Lever Lock

Sargent 11G05 Entrance or Office Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11G05 Entrance or Office Lever-

• Deadlocking latch

• Latchbolt by either lever unless outside lever is locked by push/turn button in inside lever

• Turn button must be released manually

• Key only retracts latchbolt when outside lever is locked

• ANSI F81

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)
Sargent T-Zone 11G04 Storeroom or Closet Lever Lock

Sargent 11G04 Storeroom or Closet Lever Lock. The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks. The unique T-Zone® construction provides unequalled strength and durability for the most demanding applications such as schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch far exceeding the 156.2 Series 4000 Grade 1 standards like no other lock can. 

Sargent 11G04 Storeroom or Closet Lever-

• Deadlocking latch

• Latchbolt by lever inside or key outside

• Outside lever rigid at all times

• ANSI F86

Ideally Suited For:

  • High traffic doors
  • Areas subject to severe abuse
  • Schools, hospitals, other public buildings
  • Retrofit applications

 Schools  Healthcare  Commercial 

Finishes: US26D, US26, US10B, US10, US4, US3

Levers: Lever L, Lever P, Lever B

Maximum Strength & Durability

  • True interlocking between the stainless steel lockbody and latch. Provides unequalled strength and durability
  • Independent Testing proves: Exceeds ANSI/ BHMA A156.2 Grade 1 standard for cycle testing. Over 10 MILLION cycles!
  • Withstands 3-1/2 TIMES ANSI/ BHMA A156.2 Grade 1 torque force on a locked lever. Over 3000 in/lbs!
  • Virtually no lever sag even after 8 million cycles
  • 10 Year limited warranty. No service required to maintain warranty

Certification Compliance

  • Meets and greatly exceeds ANSI/BHMA A156.2 Series 4000-Grade 1
  • UL and cUL listed to Canadian safety standards Listed for 3 hour doors (double doors require 41-option)                                                                            Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
  • Meets UL 10 C and UBC 7-2 (1997)
  • All levers conform to ADA requirements for barrier-free accessibility. Levers (L,J and P) conform to California Administrative Code Title 19
  • UL listed: ANSI/SDI-BHMA A250.13; ANSI/ASTM E330-2002; ANSI/ASTM E1886-2005 & ASTM E1996-2009 UL Certification Directory ZHem.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1

Maximum Convenience

  • fits 161 door preps
  • fewer parts for easier installation
  • only 45 degrees of lever rotation required to retract latchbolt
  • 19 functions. Many functions are easily field changeable
  • 4 solid ADA lever designs and 4 roses available to cover a wide variety of door preps and design requirements
  • simple cylinder removal. Easy change outs

Innovation

Patented "T-Zone" construction with true interlocking between the lockbody and the latch. Provides unequalled strength and durability for the most demanding applications

Security

  • High security lever attachment available for applications subject to severe vandalism
  • Resists vandalism
  • Torx® and spanner screws
  • Classroom security function available
  • Security key systems available (Signature, Keso F1, Keso, XC)